Self-leveling cup holder for TFK stroller

Designed for TFK Joggster Adventure. The holder prevents the cup from tilting in all directions and also uses printed “springs” to compensate for movements in the vertical direction.

Dimensions

Inner diameter of the holder is 75 mm. The diameter of the handle should be around 22 mm.

The holder must be attached to the handle with four screws M3x25mm.

Printing

I recommend using PETG, because it provides good flexibility for the springs and seems to be sufficiently durable. No supports needed.

Self-leveling cup holder for TFK stroller

by phi.gl · original on Printables ↗

Sports & Outdoor / Other Sports

♥ 1.1k⬇ 3.3k🖨 21 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗cupholderprintinplacecoffeecupholderstarbuckscoffeecupgyroscopicstrollerpram

Print profiles

Cup-holder_by_PhiGl.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cup-holder_by_PhiGl_MOUNT.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cup-holder_by_PhiGl.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print