I think this style of bracelet is really cool, and thanks to Emmett that inspired me with his Strechy Bracelet ( http://www.thingiverse.com/thing:13505 ). I went for a simple rounded shape with 36 notches.

The reason i really wanted to make this was that i found some really cool UV activated color changing filament from 3D Prima ( http://www.3dprima.com/ ) and i wanted to make something small but yet visible that you can have on you at all time with it.

Might put up some other variations if i figure out something i like.

Print Settings

Printer:

Wanhao Duplicator i3

Rafts:

No

Supports:

No

Resolution:

0.3mm

Infill:

0%

Notes:

I sliced it with Cura.
Fill density 0%

Expert config -> Infill -> Uncheck Solid infill top and bottom

Expert config -> Black Magic -> Check Spiralize the outer contour

In normal scale the inner diameter i roughly 55mm, Sizes smaller than 0.9 might have trouble with gaps sticking together.
Tip: You can scale X,Y and Z independent in Cura, that let you adjust inner diameter and height differently.

Category: Bracelets