This is a latching/hinged parametric box, built in Replicad. 

Supports width, height, depth, dividers, outside radius and embossed text on the inside of the lid,  engraved text on the outside, or inlayed text for MMU printing (or manual m600 swapping), two hinge and latch style and count, and a basic SVG path for the lid.

Customizer Instructions

1. Download parametric-box-configurator.zip and extract it
2. Open parametric-box-configurator.html in the extracted folder
3. Change dimension parameters as desired
4. Click the download STL (or STEP) file button

You can add an SVG to outside of the lid using the “Outside SVG" button in the parameter panel.

SVG notes!

If you want to add an SVG to the lid, prepare your SVG first, making sure to:

• Outline your strokes (stroke widths and caps are not supported)
• Outline your text (fonts are not supported)
• Combine and cut paths as necessary (overlapping paths are not supported)

I've been printing these at 0.3mm layer height, and have not fully dialed in the hole sizes. For me it's too dependent on the filament I'm using, and the filament I'm using for the hinges. You can adjust the hole size with the hole size variables.

Updates

For a customizable box with a sliding lid, see: https://www.printables.com/model/425966-parametric-sliding-lid-box

For a slide-down lid: https://www.printables.com/model/702716-parametric-box-with-lid