Those feet have a 70° degree of freedom to accommodate the angles of the MH500 chair from decathlon. Perfect for wet grass or uneven terrains. In PLA. The ball part has a full membrane on the bottom for easy printing. Use painters tape for a tight fit on the aluminum legs. (1 or 2 revolutions at the tip of the leg before inserting it in the ball part.
This mod is not definitive, keep default feet in a safe place if you don't like it, which I hope you won't ;-)
V2:
step and fusion_360 file added
Feet camping chair
by flol3622 · original on Printables ↗
Sports & Outdoor / Outdoor Sports
♥ 176⬇ 685🖨 9 prints
Print profiles
ball end.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
feet cap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
quechua feet.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print