This is a bird house designed to look like a traditional Swedish cottage with a small front porch.
You can decide if you want to print the house shell as one piece:
- gehaeuse_v2
or you can print the house shell in 3 parts:
- Floor: boden_v2
- Sidewall 1: fasssade_01
- Sidewall 2: fasssade_02_v2
There are also two mounting plates for the house available:
- montageleiste | for screw mounting (M6 or similar)
- montageleiste_2 | for zip tie, wire or string mounting
What you need:
- Patience ( My printing time was ~100h)
- Super Glue
- A drinking straw (5mm Outer Diameter) for the roof gutter
- A M6 Screw and nut or something similar to mount the birdhouse to the mounting braket
- 4 M5 Nuts and 4 Screws for the detachable roof
- I have also used black nail polish and painted the surface for the window and door opening black before i glued the parts to the house. Additional notes:
The standard birdhouse hole size is 30mm (einflugring_gewinde) and 45mm (einflugring). Please have a look here for different birdhouse hole sizes if you want to attract a specific bird.:
https://www.thespruce.com/bird-house-hole-sizes-386641
http://www.vogelhaus-nistkasten.de/nistkaesten/einflugloch-nistkasten/ (For birds that are typical for germany)
Please make sure to add support, when you are printing the roof. The roof is the only part of the assembly that needs a little bit of support at the bottom of the print.
If you have a woodpecker close by the chances are high, that he will like the sound of the birdhouse and will tear big holes in the walls. It happened to me already twice. I really don't have a solution for that. I printed the 3rd house now with almost 100% infill for the walls. I hope this will help.
You can change the hole size for a specific bird type e.g. with the Microsoft 3D Builder. And if you like you can also add them as a remix.
UPDATE 1:
There is a new assembly for the birdhouse hole:
- SCREW: einflugring_gewinde and
- NUT: einflugring_mutter.
UPDATE 2:
- If someone does not want to have the water reservoir on the bird house I have added modified parts
- If someone wants to have a specific hole diameter, you can use the new file "einflugring_gewinde_without_hole.stl" and add the hole with your specific diameter e.g. with the free Microsoft 3D Builder Software
Print Settings
Printer:
Hypercube
Rafts:
No
Supports:
Yes
Resolution:
0,2mm
Infill:
>25%
Notes:
My Bird house was printed with the following Materials:
- Das Filament PETG - Ruby Red
- Das Filament PETG - Black
- Das Filament PETG - White
Category: Outdoor & Garden
SWEDISH BIRD HOUSE
by PurchenZuPoden · original on Printables ↗
Household / Outdoor & Garden
♥ 579⬇ 1.7k🖨 39 prints
Print profiles
kanten.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
fenster_klein.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
fasssade_02_v2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
tuer.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
dachblende.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
montageleiste_2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
seitenwand_links.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
einflugring.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
frontdach.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
frontdachblende.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
frontboden.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
boden_v2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
dachrinne.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
dach_komplett.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
einflugring_mutter.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
seitenwand_rechts.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
gehaeuse_v2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
montageleiste.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
fasssade_01.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
fasssade_01_without_water_reservoir.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
boden_v2_without_water_reservoir.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
gehaeuse_v2_without_water_reservoir.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
einflugring_gewinde.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
einflugring_gewinde_without_hole.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print