Supplies Needed

8x3 mm Magnets (2 required) & superglue to hold them in. Magnets are optional.

Description

A small jig to guide your screws and nails straight and to protect your fingers. The tip is printed with 50% infill so a hammer or screwdriver won't do any damage. There's a small brim you need to peel off on the back end. I quick squirt of WD really makes the hinge swing smoothly. Feels like it was machined.

Nail Guide / Finger Guard

by Matt Boyer · original on Printables ↗

Hobby & Makers / Tools

♥ 1.5k⬇ 2.8k🖨 57 prints

License: Creative Commons — Attribution — Noncommercial ↗guardjigguidescrewscrewdrivernail

Print profiles

Nail-Guide_211230.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
nail-guide_220725.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print