Introduction
This jewelry box has room for 4 trays and is suitable for printing on a small printer such as a Prusa MINI.
Instructions
Print one of each item (or choose whatever trays you like), except the rails, which must be printed in 16 copies.
The rails are meant to be glued using CA glue (aka. superglue) into the slots inside the main box.
For the hinge you need a short piece of ~2mm wire. I clipped a small piece out of a simple wire coat hanger from the dry-cleaner.
When the wire is fitted into the hinge, glue the HingeStopper part into the open end of the hinge using CA glue.
Tolerances have been designed in, but it may still be necessary to file the rails and possibly the hinge in order to make everything fit, depending on your printer precision.
Jewelry box
by Blytte · original on Printables ↗
Fashion / Women
♥ 239⬇ 1.3k🖨 7 prints
Print profiles
HingeStopper.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
BasicTray.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Rails.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
RingTray.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
TwoSectionTray.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ThreeSectionTray.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
JewelryLid.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
JewelryBox.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print