Cyclodial Gearbox 40:1 with Tarot 4108 BLDC and CUI AMT102 capacitive encoder.
Video assembly instruction available!
Mounting instructions for the encoder
There are also instructions on how to change the gearbox ratio...
https://github.com/SwannSchilling/Cycloidal-Drive/tree/main
Print instructions
Printed on my MK2 with ABS on .2mm with Linear Advance turned on.
The default 20 percent infill seems to be fine, but for disks and output you can adjust the settings. I need to still do some stress tests on this design.
Add supports where you need them.
It could be beneficial to print those disks and the output in PLA or in PETG. ABS is super strong, but also breaks super easy...while the other two are having slightly different material properties.
These are the parts needed to assemble the gearbox...
1 × Tarot 6S 380KV 4108
1 × CUI AMT102
2 × Bearing 12x18x4 mm
2 × Bearing 40x52x7 mm
2 × Bearing 15x24x5 mm
16 × Bearing 4x7x2.5 mm
4 × Pin 3 x 22 mm
8 × Countersunk M3 x 30mm
4 × Nuts M3
5 × M3 x 5mm
Also check my Instagram for more…
https://www.instagram.com/open.the.pod.bay.doors/
Cycloidal Drive - 3D Printed Gearbox 40:1
by Mickey666Maus · original on Printables ↗
Hobby & Makers / Mechanical Parts
♥ 169⬇ 1.9k🖨 0 prints
Print profiles
cam.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
bottom.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
motorcase.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
camdriver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
top.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
rotor_2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
rotor_1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
output.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print