Charger for 18650 with spot for a 17mm x 27mm TP4056 charger / protection module.
Underneath the 18650 holder there is a channel to run 1-3 wires from the charging module to the second pole and or out the other end of the charger.
There are two chamfered screw holes for screwing down the charger.
Print instructions
Category: Electronics Summary
Charger for 18650 with spot for a 17mm x 27mm TP4056 charger / protection module.
Underneath the 18650 holder there is a channel to run 1-3 wires from the charging module to the second pole and or out the other end of the charger.
There are two chamfered screw holes for screwing down the charger.
18650 Charger
by mathiaspl20 · original on Printables ↗
Hobby & Makers / Electronics
♥ 457⬇ 2.5k🖨 19 prints
Print profiles
18650.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print