Adapter to attach a Nikon camera to a focuser for prime focus photography.
Print instructions
Unlike the example in the photo, you might want to print this in a matte black material to avoid reflections.
Print Settings
No rafts, no supports. Infill 50%.
Because of the low tolerances in the bayonet part, It's best to print that part at at most 0.15mm layer height, avoiding rounding errors. Cura does this just fine with "adaptive layers" and for instance a layer height of 0.175 with 0.025 maximum variation.
Nikon F Mount to 1.25 or 2 inch telescope adapter.
by Dan H · original on Printables ↗
Learning / Physics & Astronomy
♥ 61⬇ 666🖨 5 prints
Print profiles
telescope_adapter_1_25_inch.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
telescope_adapter_1_25_inch_long.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
telescope_adapter_2_inch.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print