"V" the "Visitors" Laser Gun.
The laser gun of the iconic television series of the 80s, "V" the "Visitors".
Print instructions
Category: Props Summary
"V" the "Visitors" Laser Gun.
The laser gun of the iconic television series of the 80s, "V" the "Visitors".
Print Settings
Printer Brand: Ultimaker
Printer: Ultimaker 2
Rafts: No
Supports: Yes
Resolution: 0.2 mm
Infill: 10-15%
Filament: Fillamentum PLA Traffic Black and Crystal Clear Iceland Blue
Notes:
First I will indicate the general print settings and then detail them for each piece
Nozzle: 0.4 mm
Layer Height: 0.2 mm
Line Width: 0.35 mm
Wall Line Count: 3
Z Seam Alignment: Shortest / Hide Seam
Infill Density: 10-15%
Infill Speed: 60 mm/s
Outer Wall Speed: 20 mm/s
Inner Wall Speed: 35 mm/s
Top/Botton Speed: 30 mm/s
Support: Yes
Support Over Hang Angle: According to piece. Maximum limit of degrees for the minimum supports.
Support Density: 15%
Support Interface Thickness: 0.6 mm
Support Interface Density: 65%
Use Towers: No
Printable parts:
IMPORTANT!! See photos for the print position of each piece.
- V_LaserGun_Body: Aprox.Time: 5 h 30 min. Material: 59 gr.
Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
Support Over Hang Angle: 82Âş
Recommended filament: Fillamentum Traficc Black.
- V_LaserGun_Grip: Aprox.Time: 5 h 30 min. Material: 58 gr.
Z Seam Alignment: Sharpest Corner / Hide or Expose Seam.
Support Over Hang Angle: 80Âş
Recommended filament: Fillamentum Traficc Black.
- V_LaserGun_Cannon: Aprox.Time: 4 h 50 min. Material: 43 gr.
Z Seam Alignment: Shortest / Hide Seam
Support Over Hang Angle: 78Âş
Recommended filament: Fillamentum Traficc Black.
- V_LaserGun_Rifle_L_Part: Aprox.Time: 4 h 30 min. Material: 42 gr.
Z Seam Alignment: Shortest / Hide Seam
Support Over Hang Angle: 85Âş
Recommended filament: Fillamentum Traficc Black.
- V_LaserGun_Rifle_conector: Aprox.Time: 30 min. Material: 5 gr.
Support: NO
Recommended filament: Fillamentum Crystal Clear Iceland Blue.
- V_LaserGun_Rifle_Join_Body_Grip: Aprox.Time: 10 min. Material: 2 gr.
Support: NO
Recommended filament: Fillamentum Crystal Traficc Black.
"V" the "Visitors" Laser Gun
by nacho3D · original on Printables ↗
Costumes & Accessories / Props
♥ 79⬇ 597🖨 10 prints
Print profiles
v_lasergun_rifle_join_body_grip.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
v_lasergun_rifle_conector.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
v_lasergun_body.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
v_lasergun_rifle_l_part.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
v_lasergun_grip.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
v_lasergun_cannon.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print