🖨️ Print Shop
Toy Animal Fence (Schleich compatible)

This is a toy animal fence that I designed to be compatible with the products of a renowned European toy animal brand.

If you intend to print this on a vanilla extrusion-based printer, you should use the "FDM" version of the STL and switch off automatic support generation in you slicer.

You may also create your own remixes on TinkerCad at
https://www.tinkercad.com/things/eLOVkxoPlpQ-schleich-fence-fdm

Please honor the license and don't sell this on eBay. Or else.

Print instructions

Printer: Anycubic i3 Mega (UB)
Supports: No
Resolution: 0.15
Infill: 25%

Notes:

FDM/PLA Notes: Make sure the first two layers are printed nice and slow. Do not attach a brim directly to the object because they will create a lot of work for you removing the support structures afterwards. On a correctly aligned printer with a heated bed you should not need any rafts and no brim to keep the object on the surface. The support structures are designed in a way that they should come off without any major effort.

Toy Animal Fence (Schleich compatible)

by layershifter · original on Printables ↗

Toys & Games / Action Figures & Statues

♥ 103⬇ 1.2k🖨 17 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗toyhorsefencethingiverseschleich

Print profiles

  • schleich_fence.stlDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • schleich_fence_fdm.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print