A 2-piece case for Raspberry Pi 4, with fan mount. STL is in two versions, one leaves the GPIO pins accessible, the other does not.
The STL is flat and with no writing, the grid texture you see was done in Prusa slicer, so you can do it as you prefer.
Fan mount is designed to fit a 30 x 30 x 7 mm CPU fan, I used these:
https://www.amazon.de/-/en/gp/product/B07FVQG926/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
You will need an extra 4 M2.5 screws for assembly (screws are on the bottom side)
Print instructions
I added a slab modifier and set top/bottom layers to 0, and infill to 60% stars. I changed toe color after a few levels, because I liked the look of it. No supports needed.
Raspberry Pi 4 case with fan mount
by iani_ancilla · original on Printables ↗
Gadgets / Computers
♥ 111⬇ 1.6k🖨 7 prints
Print profiles
pi4-case-with-fan-and-gpio.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
pi4-case-with-fan-hole.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print