Are your headphones sitting on the floor right now? Are they cluttering up your desk? Do you have too many headphones and don't know where to put them all?

No more shall your headphones be treated with such disrespect! Treat them right with a luxurious wall-mounted headphone holder. It works with pretty much any pair of headphones with up to 2 inch wide bands. Display your headphones proudly!

These are designed to work very well with the simple and effective 3M Command strip. The little round pull tab should be sticking out of the bottom of the mounting plate, and it should stick well enough to hold any pair of headphones.

Print instructions

Category: Organization Summary

Are your headphones sitting on the floor right now? Are they cluttering up your desk? Do you have too many headphones and don't know where to put them all?

No more shall your headphones be treated with such disrespect! Treat them right with a luxurious wall-mounted headphone holder. It works with pretty much any pair of headphones with up to 2 inch wide bands. Display your headphones proudly!

These are designed to work very well with the simple and effective 3M Command strip. The little round pull tab should be sticking out of the bottom of the mounting plate, and it should stick well enough to hold any pair of headphones.

Print Settings

Printer: Folger Tech FT-5

Rafts: No

Supports: No

Resolution: 0.35mm

Infill: 20%

Notes:

Any print settings will work, but printing with a big nozzle and big layers helps with strength and print speed.

If you have problems with any of the overhangs, make sure your part cooling fan is turned up high enough. If you don't have one, you probably should.