A very quickly designed planter for Vase mode printing. I used a 0.6mm nozzle, 0.35mm layer height and a 1.45mm line width. If you want to riff on the design the Fusion 360 model is attached (please remember attribution if you do!)
Print instructions
Print however you please, Vase mode looks good though ;)
I suggest 5 layers for the bottom. Print the version with Triangular holes if needed - these holes work well to hold marbles to elevate the bottom of the planter in the tray. They are triangular to allow water to still drip through.
9 Sided Twisted Planter
by Dub MFG · original on Printables ↗
Household / Outdoor & Garden
♥ 7.0k⬇ 22.0k🖨 254 prints
Print profiles
9-sided-twist-planter.stlIN STOCKDEFAULT
⏱ 2h 35m · 82 g · 168 × 169 × 112 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
9-sided-twist-planter-dripholes.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
9-sided-twist-planter-tray.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print