An OEM profile keycap that clearly marks an exit.**

Keycap base model from another designer on Thingiverse, check them out here: https://www.thingiverse.com/thing:2783650

**Not just for Semiologists!

Print instructions

80% infill
4 shells

Supports enforced up until 1.5 mm (to hold the integrated supports)

Optional: filament change at 9.50 mm for a two-colored keycap with a clear sign (best way to make it!)

After printing: cut the 6 support posts from the keycap and clear any stringing. Sand if desired.