If you like it feel free to leave a comment or buy me a "coffee":
https://www.buymeacoffee.com/redangel1984

These little (or bigger) boxes can be stacked on your desk or glued using double sided tape under the edge of a table or shelf to use them as little drawers for your screws/nuts or other parts(see pics).
I also included an .stl with the default dimensions, but recommend using the .f3d to edit the parameters. See instructions below.

Have fun and happy printing!

Print instructions

Print Settings:

Supports: No

Layer height: any - (0.16-0.28)

Perimeters: 3+

Infill: >30%

Material: any - (PLA, PETG, ASA, ABS, ...)

Rafts: No
</ul>

Default Parameters

ParameterValue

Box Length60 mm

Box Width40 mm

Wall Thickness2 mm

Box Height16 mm

Corner Chamfer 5 mm

Tolerance_10.03 mm

Tolerance_20.10 mm

Box Top Thickness2 mm
</table>
</p>

Instructions

1. After you've opened the *.f3d file in Fusion360 go to:
   Modify -> Change Parameters.

2. Change the desired values.

3. Go to: File -> 3D Print and export as *.stl