13 named infill swatches and 1 blank swatch. Great for a quick reference to each of the 13 infilled types in PrusaSlicer.

One Swatch takes about 40min (the STL file is for Gyroid Only)

New Version 2 is here: 

https://www.printables.com/model/290675-infill-swatches-v2

Print instructions

Quality: 0.2
Material: PLA
Infill: 10% / 20% (set on each object)

Open the 3mf file in PrusaSlicer and move the swatches you want to print onto the print bed

Each swatch has its own modifier which removes the top layer of the swatch.
When dragging the swatch you want to slice onto the print bed, make sure its modifier goes along with it.