Simple hangboard that can be used with any rope up to 7mm diameter therefore it can be hung any where around the house or on a tree for example.
A training/exercise tool typically used by climbers to improve finger strength.
I've included the 3D model so you are free to remix
Print instructions
Print in PETG
15% infill, minimum 3 perimeters, 0.25mm layer height, 6 top and bottom layers for both parts.
For the rope track part print in orientation of the stl (without supports which worked for me).
I've tested the hangboard with 100kg and it was fine. I predict it can support much more than that as well.
Portable Hangboard
by Lacuna Edge · original on Printables ↗
Sports & Outdoor / Other Sports
♥ 147⬇ 807🖨 11 prints
Print profiles
onehander_v2.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ropetrack_v2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print