HiFiBerry Player
If you enjoy listening to music you will really love this tiny music player!
The player consists of:
RaspberryPi 3B+ or
RaspberryPi 4*
HiFiBerry DAC+ PRO or
HiFiBerry DAC-2 PRO (added 22 Jule 2025)
Additional accessories:
RPi Power Supply
Micro SD Card
4 Nylon spacers
You will also need the 3D printed case of course!
This is an easy to 3D print case for the Raspberry Pi 3B+ (also compatible with 3/3B) or Raspberry Pi 4* and the HiFiBerry DAC/DAC+/DAC+ PRO/ and DAC2/DAC2 PRO. You can find some extra top covers in my RPi case designs.
The case for the Raspberry Pi 4 is not tested. Any feedback is welcome.
Assembly Instructions
Place the 4 nylon screws in the holes under the case. Place the RPi board on the case matching the holes with the screws. Then screw the spacers. Because it is difficult to hold all 4 screws simultaneously, try one at a time. After all spacers are in place, take the 3D printed RCA cover and put it on the RCAs then mount the HiFiBerry DAC pushing it gently for the GPIO pins to sit. Then place the top cover.
There is an animation, to visualize the process, in the following link:
https://www.hifiberry.com/wp-content/uploads/2019/10/HiFiBerry-Case-Assembly.mp4?_=1
When you finish with the assembly of the player go to https://www.hifiberry.com/build/guides/
Enjoy your music!
Extra:
In the "Special Cases" Folder you will find some models for specific uses, like additional POE hat.
Support me
Thank you for your interest in my designs. If you want to support me, please consider a small donation at: paypal.me/stamos3d . This gives me extra motivation to continue providing new designs.
Hifiberry Case
by Stamos · original on Printables ↗
Gadgets / Audio
♥ 143⬇ 1.7k🖨 17 prints
Print profiles
hifiberry-case-rca-cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
rpi-4-case-cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
rpi-3-case-cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
hifiberry-case-pi-4 DAC+PRO.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
hifiberry-case-pi-3 DAC+PRO.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
rpi-3-case-cover-hex.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
rpi-4-case-cover-hex.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hifiberry case Pi 4 DAC 2 PRO.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hifiberry case Pi 3 DAC 2 PRO.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hifiberry Case 3 POE.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print