I made the grip for the Lite by rescaling my grip for the regular Switch based on published size data. I don't own a Lite but Bacon26 and Dumpe (thank you) tested it and I corrected the size accordingly. The current size would be very tight. Scale x (and only x) to 100.5% for a semi-tight fit. If you want to use a protective tape (e.g., electrician's tape) on the side, you should scale x to 101%.

Print instructions

Category: Video Games Print Settings

Printer Brand: Prusa

Printer: i3 MK2S

Rafts: No

Supports: Yes

Resolution: 0.2mm

Infill: 25%

Notes:

Print in PLA at 205c for a strong layer bond. Be sure to use at least 8mm of brim and support (65 degrees everywhere will do). You may need to rotate it to fit on your bed diagonally.