The originality of this piece is that the heart turns freely in the body of the cat.

Print instructions

Print Settings

1 x LucycatBody : Layer:0.20mm Raft:no Support:no Infill:15%
1 x LucycatHeart : Layer:0.20mm Raft:no Support:no Infill:15%

Accessories

1 x m3x25mm SHCS
1 x m3 washer
2 x 623zz bearing

Mounting

Insert the two 623zz bearing in LucycatBody.
Insert the m3x25mm SHCS under the LucycatBody, insert the m3 washer and fit the screw in the LucycatHeart.
Do not tighten strongly, the LucycatHeart must turn freely.

Lucy the heart-turning cat

by dancan13f · original on Printables ↗

World & Scans / Animals

♥ 143⬇ 783🖨 13 prints

License: Creative Commons — Attribution — Noncommercial ↗catheartthingiverse

Print profiles

lucycatbody.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
lucycatheart.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print