I was looking for a wall mounted guitar holder, all of the ones that I was finding on Thingiverse had to be printed in an orientation which made the least structural sense relative to the force being applied. This is a simple wall mounted guitar holder which can be printed in a more stable orientation.

The mount can be hung with either nails or you can use up to #8 screws (aprox. 4.2mm diameter) and the holes are 92mm apart from center to center.

Print with the flat portion of the hanger arms on the print bed (holes for hanging shouldn't be on the print bed)

Let me know if you have any questions or concerns, if you would like the Fusion360 files, just let me know and I can get them sent to you. Enjoy!

Print instructions

Category: Organization Print Settings

Printer Brand: Prusa

Printer: i3 MK2S

Rafts: No

Supports: No

Resolution: 0.25

Infill: 20%

Notes:

3 bottom and top layers and 3 perimeters were used, approximate printing time was 4 hours