Camera Mount

I build this mount to attach this Raspberry Pi Infrared Night Vision Camera with infrared spots to a flat surface (an existing pi case in my case). The pi camera should have been adjustable (direction / angle).

I used some existing models and modified others:

• partly used and modified http://www.thingiverse.com/thing:2200231 (had to repairhead_front.stl before printing it with Prusa i3 (non manifold faces, zero faces, ...), fixed it with https://makeprintable.com/)
• modified https://www.thingiverse.com/thing:2275223 (rpi_cam_stand.stl) and made it a litte bit wider

• I buildPiNoirCamCaseHolder-ball-mount.stl as a connection between the camera case and the ball mount stand
  Attention: The ball mount in this version is a little bit to tight. So i broke the first print while trying to put it into the mount.
  I will add a new version very soon. As an alternative you can sand off the ball and use grease to get it into the mount. =>solver in new version (20180104)

  UPDATES

  20180104:

---

• added strengthening for the mountpoints toPiNoirCamCaseHolder-ball-mount.stl (in the previous version they broke while removing brim)
• widenedPiNoirCamCaseHolder-Rpi_Cam_Stand.stl because it was to tight

Print instructions

Category: Electronics Print Settings

Printer Brand: Prusa

Printer: i3 MK2 MMU

Resolution: Normal (0.2 mm)

Infill: 20%