A seamless phone/ipad stand. It takes 1 h 30 min to print. No overhang, NO sharp edges, No support, YES YES YES.
More stands with various logo can be found in my other models, e.g.,
https://www.printables.com/model/114531-phone-stand-with-rose-logo-valentine-day

with rose, cube, hearthstone, basketball…

Inspired by https://www.thingiverse.com/thing:1464340 and redesign using Fusion 360.

Here, I round all the edges in the redesign that will be safe for my 2 years old son. Most importantly, I design it in a way that the holder can print on the side, so that there is no more overhang issue at all and the beautiful curvature in the design can be achieved nicely in the print.

PhoneHolderV2_PrintableOntheside.stl
Use this for printing and print as it is.

PhoneHolderV2_forModification.stl
This is for the purpose of modification.

Just in case you want to add a logo on the back of the stand. The angle of two plates are 40°

Print instructions

It can be also printed in Vase mode.