Buy a printed fidget cube from me directly: AustinMakes.etsy.com

An addictive fidget toy that you won't be able to set down! Prints in one piece and works right off the print bed.

Note: vertical hinges will be stiffest after printing, but break in after a bit of fidgeting!

optimized for 0.2mm layer height and a 0.4mm nozzle
10% infill is plenty, but up to 100% infill increases the weight, which is super satisfying!
part cooling on 100% fan speed (except first layer)
vertical shells on 2+ perimeters for strength
Cura users: disable No Skin in Z Gaps under your Shell settings

yafic_v2.stl is the original – easy to print & loved by many
yafic_v2_rounded.stl has rounded edges – more difficult to print, but nicer to hold
yafic_v2_rounded_topjointmod.stl has modified top joints – prints better on some (fast) printers
yafic_v2_test.stl is a smaller test file – use it to try out print settings

Yet Another Fidget Infinity Cube v2

Toys & Games / Puzzles & Brain-teasers

♥ 16.6k⬇ 157.7k🖨 2.5k prints

License: Creative Commons — Attribution — Share Alike ↗toypuzzlespinnerprintgameinfinityfidgetcubefidgetcubeinfinitycube

Print profiles

yafic_v2_rounded.stlIN STOCKDEFAULT
⏱ 1h 5m · 30 g · 81 × 40 × 20 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
yafic_v2_test.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
yafic_v2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
yafic_v2_rounded_topjointmod.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print