Its a battery holder. Made by fafabienman from https://www.thingiverse.com/thing:3358129
I did not make the model I'm just show casing it.
Print instructions
I printed this in 0.3 layer height and no supports did a good job and pretty quick too. PLA
Battery Holder
by Nodashi · original on Printables ↗
Hobby & Makers / Electronics
♥ 13.2k⬇ 52.1k🖨 712 prints
Print profiles
Battery_Holder_AAAandAA.stlIN STOCKDEFAULT
⏱ 2h 2m · 98 g · 105 × 80 × 100 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print